top of page

POLYMER ROOF TILES TECHNICAL SPECIFICATIONS

Roof material type

70% sand+28% plastic (polymer) and 2% of coloring material.

Mass 1m²

20 kg

Full measure

305ˣ400ˣ10mm

Laid measure

285ˣ345ˣ10mm

Ridge full measure

215ˣ195ˣ315ˣ10mm

Ridge laid measure

215ˣ195ˣ300ˣ10mm

Lathing interval

300-350 mm

Coverage rate per 1 sq.m.

9 units

Weight of 1sq.m. not more than

21kg

Biological stability

Resistant to moss and molds spread

Cross-breaking strength

10mPa

Temperature range

-65° ... +250°C

Frost resistance

300 frost cycles

Density

1500kg/m³

Flame spread group

FS4

Abrasiveness

0,2 g/m³

Water absorption

0,3%

Fracture toughness

3,8 kgf/sm²

Chemical stability

Not active to acid and alkaline environment

UV-resistance

Resistant to UV-radiation- doesn't lose its color

Heat conductivity

2800J/m² sec

Category of impact on the organism

Harmless

Timber coverage rate per 1m of lathing

0,0075 m³

Warranty

25 years

Please reload

Your details were sent successfully!

© POLYMER BUILDING SUPPLIES Ltd. Reg.number:540750| Tel: +353(0)45 532534/ +353(0)87 7772083| Email:contact@polymerbuildsupplies.com

ABOUT
New production technologies and development of polymer industry enabled  to develop polymer-sand composition material which makes the base for the new type of this roofing material POLYMER ROOF TILES.
Polymer-sand tile consists of 70% of sand, 28% of plastic (polymer) and 2% of coloring material.
Thinking of all advantages and drawbacks of existing roofing materials, we can come to some conclusions : the roofing should be durable, light, water and fire-resistant, requiring minimum operating expenses. And the whole roof should be such as done once with care and serve you for the next 50 or even 70 years.All these requirements may be found in our roofing material-POLYMER SAND TILE.

POLYMER BUILDING SUPPLIES LTD./ PH. 045-532534/087-7772083/E-MAIL- contact@polymerbuildsupplies.com

bottom of page